u.s. solid brass electric solenoid valve

It can withstand pressure up to 145 psi (10 bar) and temperatures as low as 15☏ and as high as 250☏.

The orifice size is 15mm and Cv value is 4.8. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The port size is 3/8” inch female NPT threaded. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. Taking the energy away from the valve will close it and stop the flow. If energized continuously for more than 8 hours the coil may burn.Model BZW-10 of our brass valve line is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two ports in which media flows and the valve will open when energized to allow media to pass through.

The coil will reach a maximum temperature of about 176☏ (80℃), which is fully complied with national standard: JB/T7352-2010. While energized, under normal operating conditions, solenoid valve will get HOT. OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). Temperature Maximum: 248 degrees Fahrenheit (120 degrees Celsius)Īlso available with brass body: Item # USS2-00002 Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius) Operational pressure range: Air/Water/Diesel fuel/Kerosene: 0-7 Bar (0 to 101 PSI) Oil: 0-5 Bar(0 to 72 PSI)įlow capacity: 12 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI

Suitable Media: Air, water, oil, Diesel fuel, kerosene etc.

U.s. solid brass electric solenoid valve